Piezosurgery // GB 7 / 32
MANUAL OF USE AND MAINTENANCE
02.0 - TESTING
02.1 - Testing of the equipment
All equipment manufactured by MECTRON is thoroughly checked and tested, including
all components.
During the testing procedure the components are subjected to a number of work cycles.
The tests highlight any malfunctioning due to faulty components.
This procedure ensures proper functioning and reliability of all components.
03.0 - DELIVERY
03.1 - Delivery of the apparatus
The equipment contains electronic components that may be damaged by impacts even
inside the packaging. Special care must therefore be taken for both transport and storage.
In order to avoid crushing, do not place cartons on top of one.
All material shipped by MECTRON is checked at the time of shipment.
The equipment is delivered properly protected and packaged.
At the time of receipt of the equipment check it for possible transport damage. If any
damage is found, make a complaint to the carrier.
To Next Page
Loading...
