7.1.3.2 PointsofContactwiththePatient
below.
environment.
Phenomenon
BasicEMC
standardortest
method
Immunitytestlevels
Electromagnetic
EnvironmentGuidance
Electrostatic
discharges
wood, concrete or ceramic
with synthetic material, the
relative humidity should be at
least equal to 30 %.
disturbances
induced by RF
3 V
6 V
in ISM bands
Portable and mobile RF
communication devices
should not be used near any
part of the product, including
respect the recommended
distances, calculated from the
equation applicable at the
frequency of the transmitter.
•
individually or bundled
•
current clamp unless a current clamp is not suitable.
In cases were a current clamp is not suitable, an EM
clamp shall be used.
• No intentional decoupling device shall be used
•
•
•
amateur radio band, as applicable, an additional test
frequency shall be used in the ISM or amateur radio
•
R.M.S., before modulation is applied.
Discharges shall be applied with no connection to
To Next Page
Loading...
