46
Problem ProbableCause Solution
During operation, no liquid
Mectron spare parts, only.
Unscrew the insert from
the handpiece and unclog
the insert water passage
by blowing compressed air
through it. If the problem
persists, replace the insert
with a new one.
empty
Replace the empty bag with
a new one full.
not been opened.
Open the air inlet on the
correctly installed.
connections.
peristaltic pump impeller on
the tube.
peristaltic pump has been
correctly inserted.
(Refer to
page 14
properly, but when it stops,
handpiece.
not closed properly.
pump cover is closed
properly.
(Refer to
page 14
Poor performance
screwed onto the handpiece
Unscrew the insert and screw
Mectron torque wrench.
(Refer to
page
and
on page
insert.
Replace the insert with a new
one.
Table4 –
To Next Page
Loading...
