MEDA MD-6000P - Precautions and Warnings; Precautions and Warnings Details

PRECAUTIONS AND WARNINGS
- V -
Precautions and Warnings
Precautions
 The device should be operated by trained professionals.
 Please read the User Manual carefully before operation.
 Please use the device according to the requirements of the User Manual; otherwise it will
affect the essential performance.
 Please read the User Manual (§6.2 Maintenance and Attentions of Built-in Battery)
carefully before using the battery.
 Please refer to Chapter 6 and Chapter 7 for maintenance details.
Warnings
 Do not make any modification to the device without authorization.
 MEDA Co., Ltd. (hereinafter referred to as “the manufacturer”) will not be responsible for any
damage or injury caused by any failure to follow the instructions in the User Manual.
 The device is driven by a rechargeable battery; the charger must be disconnected and stop
charging when operation.
 If the battery is found hot, odoriferous, discolored, deformed, leaking, or unable to be charged
or has other anomalies during using, charging or storage, stop using it and contact your local
distributor or the manufacturer for service.
 If the Main Unit is accidentally broken, stop using it and contact your local distributor or the
manufacturer for service.
 The device is not used for therapy.
 The charger has obtained the medical electronic device safety qualification. If it is lost or
damaged, please contact the manufacturer to purchase a new one; use of charger other than
that is provided by the manufacturer may cause increased electromagnetic emissions or
decreased electromagnetic immunity of this device and result in abnormal operation and
undesirable impact on product safety. The manufacturer shall not be responsible for any
consequences arising therefrom.
 Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of MD-6000P.
Otherwise, degradation of the performance of MD-6000P could result.
 Use of MD-6000P adjacent to or stacked with other equipment should be avoided because it
could result in improper operation. If such use is necessary, MD-6000P and the other
equipment should be observed to verify that they are operating normally.