Medela Thopaz+ - Page 51

EMC
Technical documentation | 391
WARNINGS
Thopaz
+
should not be used adjacent to or stacked with other equipment. If adjacent or
stacked use is necessary, Thopaz
+
should be observed to verify normal operation in the
configuration in which it will be used.
Electromagnetic compatibility (EMC, IEC 60601-1-2:2007, Table 1)
Electromagnetic emissions
Thopaz
+
is intended for use in the electromagnetic environment specified below.
The customer or the user of Thopaz
+
should assure that they are used in such an
environment.
Emission Tests Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 Thopaz
+
uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
with nearby electronic equipment.
RF emissions
CISPR 11
Class B Thopaz
+
is suitable for use in all establishments,
including domestic establishments and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies