Preface - Introduction User’s Manual (SIP Version)
Mediatrix 1104
x
Quick Start booklet
This printed booklet allows you to quickly setup and work with
your Mediatrix 1104.
MIB Reference Manual
Lists and explains all parameters in the MIB structure.
Be sure to read any readme files, technical bulletins, or additional
release notes for important information.
Overview The Mediatrix 1104 is an IP Telephony adaptor that connects up to four
(4) analog terminals to a LAN or a WAN with access to an IP Packet
Network to permit high-quality, full duplex, audio/fax communications.
Capable of performing all required IP Telephony tasks in one
standalone enclosure, the Mediatrix 1104 offers the same enhanced
features present in the Mediatrix Telecom, Inc. line of products, and
can be an integral part of a cost-effective IP telephony solution by
complementing the existing VoIP infrastructure. In addition, a bypass
line allows calls to be routed to the SCN, in case of a network failure or
power outage.
This version of the Mediatrix 1104 uses the Session Initiation Protocol
(SIP), which is a protocol for transporting call setup, routing,
authentication, and other feature messages to endpoints within the IP
domain.
Using this Manual The following information provides an explanation of the symbols
which appear on the Mediatrix 1104 and in the documentation for the
product.
Waarschuwing: Dit waarschuwingssymbool betekent gevaar. U
overtreat in een situatie die lichamelijk letsel kan veroorzaken. Voordat
u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de
bij elektrische schakelingen betrokken risico's en dient u op de hoogte
te zijn van standaard maatregelen om ongelukken te voorkomen.
Varoitus: Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa,
joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään
laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja
tavanomaisista onnettomuuksien ehkäisykeinoista.
Warning: Means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, you must be aware
of the hazards involved with electrical circuitry and familiar with
standard practices for preventing accidents.
To Next Page
Loading...
