Chapter 1 - Using the Mediatrix 1104 User’s Manual (SIP Version)
Mediatrix 1104
15
Managing a
Conference
Call
If you are on the phone with one person and want to conference with a
third one, you can do so. In the following examples, let’s assume that:
A is the conference initiator.
B is the person called on the first line.
C is the person called on the second line.
X To initiate a three-way conference (A and B already connected):
1. A performs a Flash-Hook.
This puts B on hold and the second line is automatically
connected. A hears a dial tone.
2. A dials C’s number.
A and C are now connected.
3. A performs another Flash-Hook.
The call on hold (B) is reactivated. A is now conferencing with
B and C.
X A wants to transfer B to C during the conference:
1. A hangs up.
The conference is terminated. B and C are now connected.
X A wants to terminate the call with C and get back to the call with B
during the conference:
1. A performs a Flash-Hook.
The conference is terminated and the call with C is
disconnected. A and B are still connected and can go on with
their conversation.
X B (or C) hangs up during the conference:
1. B (or C) hangs up during the conference.
The conference is terminated, but the call between A and C
(or B) is not affected and they are still connected.
To Next Page
Loading...
