29
Approved Accessories
Megadyne recommends use of the following Megadyne accessory devices with the Mega
Power Electrosurgical Generator. These accessory devices have been tested and are
approved for use at the peak voltages listed in this manual.
The user is responsible to insure that any other accessories used with the Mega Power
ESU are rated for the maximum peak output voltages (reference to diagrams included
herein); set at the intended output control setting in the intended operating mode.
Item Description Catalog Number
Monopolar Footswitch 1400
Bipolar Footswitch 1450
MEGA Soft Patient Return Electrode 0800, 0830, M2K-01
Re-CORDalbe adhesive backed 0850, 0855, 0870, 0875
Patient Return Electrodes.
E-Z Clean Electrodes contact MEGADYNE for item numbers
Electrosurgical Pencils with tips 0035, 0035H, 0037, 0037H, 0039, 0039H
Active Electrode Cables and Adapters 0075
Warning: The use of accessories other than those specified above may result in increased
emissions or decreased immunity of the Mega Power Electrosurgical Generator.
To Next Page
Loading...