1
Preface
This service manual is for use only by qualified and trained personnel. It is intended for
servicing the Megadyne Mega Power Electrosurgical Generator only. For clinical use of
this system, please refer to the Mega Power User’s Manual.
Service Centers/Shipping Instructions
Maintenance/Service
It is recommended that maintenance calibration testing be performed at annual intervals.
Refer to the calibration testing section in this manual for details.
In addition to calibration testing routinely inspect the power cord, footswitch cables, and
connectors for any signs of damage. Replace damaged cords and/or connectors immediately.
Should your Mega Power Electrosurgical Generator require service or repair, please
contact Megadyne’s Customer Service department to obtain a Returned Goods
Authorization (RGA) number. Return the generator in its original packaging if possible
with the RGA number written on the address label to:
MEGADYNE Medical Products, Inc.
11506 South State Street
Draper, UT 84020
USA
Phone: 801-576-9669/ 800-747-6110 (U.S.A. only)
Fax: 801-576-9698
To Next Page
Loading...