Megger Easytest 20 kV - Operating the System; Configuring the System

4-17
4 Operating the System
Main menu
In the main menu you can scroll through the test profiles in the main menu using the
▼ and ▲ soft keys and read the settings for each profile in the left section of
the
display.
Furthermore, the Easytest - Setup is accessible via the main menu.
4.1 Configuring the System
In order to access the Esaytest setup, the menu item Easytest – Setup
has to be
selected in the main menu using the ▼ und ▲ soft keys. Afterw
ards, the setup can be
accessed using the Enter soft key.
The system menu offers the possibility to change the system language
and the
internal system time. Since a properly adjusted system time is exclusively
important
for the optional logging function to generate comprehensible data
, the system time
can only be adjusted at devices possessing this function.
Use the ► soft key, to scroll through the available parameters (e.g.
language, hours,
minutes). The value of the active parameter can be adjusted using the ▼ und ▲
soft
keys.
In order to save the changes, the setup window has to be left using the Enter
soft
key.
AC test 1
AC test 2
AC test 3
AC test 4
AC test 5
Hipot
Sheathtest/Pinpoint.
Easytest - Setup
voltage
08 kV
timer
5 min
cycles
0
Enter
▲
▼
Set
Engl.
D
NL
10:08:59
14/03/07
Enter
▲
▼
Serv.
►
Easytest - Setup