© 2016 CPI. All rights reserved
SCR FIELD SERVICE GUIDE
Information subject to change without
Part Number :252851027
1.2. POWER REQUIREMENTS
The SCR Banknote Recycler requires a regulated DC input voltage ranging from 20
to 28 VDC.
NOTE: PEAK readings are specified so that represented voltages are inclusive of
any ripple, surge, or sag that may exist on the power lines with the exclusion of
inrush current, which is specified separately.
General power requirements:
Standby: 10 Watts
Acceptance: Peak 30 Watts
Stacking: Peak: 125 Watts
Input Voltage: 20-28 VDC
Operating Temperature 0°C - +60°C
To Next Page
Loading...
Need help?
General
