9712938 45 / 68
Design and construction subject to change without prior notice!
No. Display text Note / possible cause Measures / remedial action
106
Wash time increase
insufficient
• Tank heating defective
• Boiler heating defective
• Supply valve defective
• If the error message reoccurs,
call a service engineer
107
No signal from tank
level sensor
• Plug connection of the wiring
• Cable breakage in wiring
• Pressure sensor defective
• Not possible to continue work-
ing
• Call a service technician!
108
Tank temperature
sensor shortcut
• Short-circuit in the wiring
• Moisture in the connector
• Temperature sensor defective
• Not possible to continue work-
ing
• Call a service technician!
109
Temp. sensor wash
tanks interrupted
• Connector incorrectly connected;
crimp connection insufficient
• Cable breakage in wiring
• Not possible to continue work-
ing
• Call a service technician!
110
Temperature moni-
toring drain pump
Notify service tech-
nician!
• The discharge pump is possibly
blocked
• Transport of waste water no longer
possible
• Operation not possible until the
blockage is removed
• Level detection defective
• Shut off local water supply
• Switch off the building-side
fuses
• Call a service technician!
111
Water loss in wash
tank
• Ventilating valve clogged
• Leakage in level control system
• If the error message reoccurs,
call a service engineer!
112
Forced drainage
due to permanently
filled wash tank
• The tank had not been drained for
a long period of time
• Change the water or drain the
machine at least once a day
114
Fine/coarse sieve
missing
• Fine/coarse sieve
– not present
– inserted incorrectly
• Cable breakage
• Sensor defective
• Magnet missing
• Correctly insert fine/coarse
sieve
• If the error message reoccurs,
call a service engineer
115
Drain pump active
after triggering of
the safety level
• Tank overfilled
• Supply valve does not close
• Safety level exceeded
• Possible to continue working