Melitta Caffeo Barista T Smart User Manual

First steps
41
ENGLISH
3.2 Checking the delivery
contents
Check the completeness of delivery using
the following list. If parts are missing,
contact your retailer.
ū Coee spoon with screw-in aid for the
water lter
ū Plastic milk container or thermal milk
container each with milk hose or just
the milk hose (depending on the
model)
ū Stainless steel plate for cup tray
(depending on the model)
ū Coee system cleaning agent
ū Milk system cleaning agent
ū Water lter
ū Test strip for determining the water
hardness.
3.3 Installing the appliance
Observe the following instructions:
ū Do not install the appliance in damp
rooms.
ū Install the appliance on a stable, at
and dry surface.
ū Do not install the appliance in the vicin-
ity of sinks or the like.
ū Do not install the appliance on hot
surfaces.
ū Install the appliance at a sucient
distance (approx. 10cm) from the wall
and other objects. The space above the
appliance should be at least 20cm.
ū Route the power cable so it cannot be
damaged by edges or hot surfaces.
3.4 Connecting the appliance
Observe the following instructions:
ū Check that the supply voltage matches
the operating voltage specied in
the technical data (see the table,
page62).
ū Only connect the appliance to a prop-
erly installed earthing contact socket. If
in doubt, consult a specialist electrician.
ū The socket must have a fuse of at least
10 A.
3.5 Switching on the appliance
for the rst time
During initial start-up, the language, the
time and the water hardness can be set.
The settings can be changed at a later
point in time (see chapter8, page53
and chapter9.8, page60).
Use the enclosed test strip to determine
the water hardness. Observe the instruc-
tions on the test strip packaging and in the
table Water hardness range, page62.
Information
We recommend pouring away the rst two
cups of coee after initial start-up.
Requirement: The appliance has been
installed and connected.
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The welcome display appears on the
appliance.
» The request to carry out the setup
appears on the display: Please set up
the machine.
» The "menu/ok" button ashes.
3. Conrm with "menu/ok".
» The Language menu appears.
4. Select your language with the arrow
buttons. Conrm with
"menu/ok".
» The Clock menu appears.
5. Select the hour and the minutes with
the arrow buttons. Conrm each set-
ting with "menu/ok".
» The Water hardness menu appears.
6. Select the determined water hardness
range with the arrow buttons or con-
rm the default value with "menu/ok".
» The request Please rell and insert
water tank appears.
7. Remove the water tank. Rinse out the
water tank with clean water. Fill the
water tank with fresh water and insert
it.
» The appliance heats up and per-
forms automatic rinsing.

Melitta Caffeo Barista T Smart Specifications

General

Brand	Melitta
Model	Caffeo Barista T Smart
Category	Coffee Maker
Language	English