Melitta Caffeo Barista T Smart User Manual

Technical data
62
ENGLISH
Before transporting the appliance, carry
out the following activities:
1. Vent the appliance (see section10.1,
page61).
2. Empty the drip tray and the coee
grounds container.
3. Empty the water tank.
4. Empty the bean container.
5. Clean the appliance (see section9.1,
page56).
6. Secure loose parts (cup plate, etc.) with
suitable adhesive tape.
7. Package the appliance.
10.3 Disposing of the appliance
Appliances marked with this sym-
bol are subject to the European
Directive 2002 / 96 / EC for WEEE
(Waste Electrical and Electronic
Equipment).
Electrical appliances do not belong in
domestic waste.
 Dispose of the appliance in an environ-
mentally friendly manner via suitable
collection systems.
11 Technical data
Technical data
Operating voltage
220 V to 240 V, 50 Hz
Power consumption Max. 1450 W
Power consumption of
networked standby mode
2.6 W
Pump pressure
Static, max. 15 bar
Dimensions
Width
Height
Depth
255 mm
365 mm
465 mm
Capacity
Bean container
Water tank
2 × 135 g
1.8 l
Weight (empty) 10.5 kg (Barista TS)
10.1 kg (Barista T)
Ambient conditions
Temperature
Relative humidity
10 °C to 32 °C
30 % to 80 %
(non-condensing)
Bluetooth Bluetooth Smart (low energy),
BTLE 4.0
Water hardness
range
°d °e °f
Soft 0 to 10 0 to 13 0 to 18
Medium 10 to 15 13 to 19 18 to 27
Hard 15 to 20 19 to 25 27 to 36
Very hard
> 20 > 25 > 36

Melitta Caffeo Barista T Smart Specifications

General

Brand	Melitta
Model	Caffeo Barista T Smart
Category	Coffee Maker
Language	English