Melitta Caffeo Barista T Smart - Assigning Personal Settings; Preparing Beverages with Personal Settings

Personal settings – "MyCoee"
52
ENGLISH
5. Use the arrow buttons to select individ-
ual characters and conrm each with
"menu/ok".
6. Repeatedly select the Exit command to
exit the menu.
» The ready symbol appears on the
display.
Activating/deactivating a user prole
Only users whose prole is activated can
be used.
Requirement: The ready symbol appears
on the display.
1. Press the "menu/ok" button for 2sec-
onds.
» The menu appears on the display.
2. Navigate to the My Coee menu.
3. Use the arrow buttons to select a user
and conrm with "menu/ok".
4. Use the arrow buttons to select
Enabled/disabled and conrm with
"menu/ok".
5. Use the arrow buttons to select Enabled
or Disabled and conrm with "menu/
ok".
6. Repeatedly select the Exit command to
exit the menu.
» The ready symbol appears on the
display.
7.2 Selecting/changing per-
sonal settings
Depending on the beverage, the following
settings can be assigned to a user:
Recipes, coee amount, amount of froth,
milk amount, hot water amount, temper-
ature, beans (BARISTA TS model only),
coee strength and coee avour.
The assignment of personal settings to a
user is always similar. Setting the coee
amount for a Cappuccino is described here
as an example.
Requirement: The ready symbol appears
on the display.
1. Press the "menu/ok" button for 2
seconds.
» The menu appears on the display.
2. Navigate to the My Coee menu.
3. Use the arrow buttons to select a user
and conrm with "menu/ok".
4. Navigate to the Cappuccino > Coee
amount menu.
5. Use the arrow buttons to select an
amount and conrm with "menu/ok".
6. Repeatedly select the Exit command to
exit the menu.
» The ready symbol appears on the
display.
» The next time a cappuccino is prepared
by the user, the selected amount of
coee is used.
7.3 Preparing beverages with
personal settings
BARISTATS model.
BARISTAT model.
The preparation of beverages using the
"My Coee" function is similar for all bever-
ages. The preparation of a cappuccino is
described here as an example.
Requirement: The ready symbol appears
on the display and milk is connected.
1. Place a vessel beneath the outlet.
2. Press the "My Coee" button until the
desired user is shown on the display.
3. Press the "Cappuccino" button.
» Beverage dispensing starts and ends
automatically.
4. Remove the vessel.
» The display shows: Easy Cleaning?
(OK for start).
5. You can execute the Easy Cleaning pro-
gramme or prepare further beverages.
a) Execute the Easy Cleaning pro-
gramme. To do so, follow the instruc-
tions on the display, see section9.4,
page57.
b) Prepare further beverages and exe-
cute the Easy Cleaning programme
later.
» The ready symbol appears on the
display.