Melitta Caffeo Barista T Smart - Melitta Connect App Installation; Daily Appliance Operation; Powering On and Off; Operating the Control Panel

Basic operation
42
ENGLISH
» The ready symbol and the request
Fill beans appear on the display.
8. Fill coee beans into the bean con-
tainer. To do this, read section Filling
with coee beans and using BeanSelect,
page44.
3.6 Installing the
Melitta-Connect-App
The appliance can be operated with
suitable mobile iOS devices via Bluetooth
or with android devices that support Blue-
tooth. You need the Melitta-Connect-App
for this. Detailed information at www.
melitta.de.
The App provides simplied operation of
the appliance, convenient management of
settings and user proles, as well as other
functions and access to the Smart Service
(Service Hotline, appliance data, etc.).
The term Smartphone is used to represent
Smartphones and Tablets in these operat-
ing instructions.
Downloading the App
1. Search in the App Store of your Smart-
phone for the Melitta-Connect-App.
2. Install the App on your Smartphone.
4 Basic operation
This chapter describes basic operating
steps for using the appliance on a daily
basis.
4.1 Switching the appliance on
and o
Before switching on after starting up the
appliance for the rst time, read sec-
tion3.5, page41.
Information
ū When switched on and o, the appli-
ance performs automatic rinsing.
ū During rinsing, rinsing water is also
conducted into the drip tray.
ū The automatic switch-o rinsing can be
switched on or o in the Settings menu.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The welcome display appears on the
appliance.
» The appliance heats up and performs
automatic rinsing.
» The ready symbol appears on the
display.
Switching o the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The appliance performs automatic
rinsing.
» The appliance switches o.
Information
ū The appliance switches o automati-
cally when it is not operated for a long
time. Automatic rinsing is also carried
out in this case.
ū The o time can be set in the Auto OFF
menu, see section8.5, page54.
ū If no beverage has been prepared since
switching on or if the water tank is
empty, no rinsing takes place.
4.2 Using the control panel
The essential functions can be accessed
using the control panel.
Press the button with a ngertip. The con-
trol panel does not react when touched
with a pen or other objects.
Only those buttons that can be used in the
appliance's current status light up.