Melitta Caffeo Barista T Smart User Manual

Preparing beverages
48
ENGLISH
2. Remove the coee grounds container
(8) and empty it.
3. Empty the drip tray.
4. Insert the coee grounds container.
5. Push the drip tray into the appliance up
to the stop.
Information
The appliance requests you to empty the
drip tray and the coee grounds container
after a dened number of beverages have
been dispensed. If the containers are emp-
tied while the appliance is switched o, it
does not register this process. Therefore,
it is possible that you are requested to
empty the containers although the drip
tray and the coee grounds container are
not yet full.
5 Preparing beverages
There are three options for preparing
beverages:
ū Standard dispensing with direct keys
and recipes (BARISTA TS model),
ū Preparation with modied beverage
settings (see chapter6, page50)
ū Use of personal settings with the
"My Coee" function (see chapter7,
page51)
Standard dispensing is described in this
section.
Please note:
ū The storage containers should contain
sucient amounts of coee and water.
Otherwise the appliance requests you
to rell it.
ū The appliance does not indicate a lack
of milk.
ū When selecting a beverage with milk,
connect the milk container or a com-
mercially available milk pack.
ū The vessels for the beverages should be
suciently large.
ū For beverage preparation, the display
must show the ready for use display.
ū Beverage dispensing is ended automat-
ically.
ū After a beverage preparation with milk,
the appliance automatically prompts
for the Easy Cleaning programme.
5.1 Preparing espresso and
café crème
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème"
button.
» The beverage is prepared.
3. Remove the vessel.
5.2 Preparing cappuccino and
latte macchiato
Requirement: Milk is connected.
1. Place a vessel beneath the outlet.
2. Press the "Cappuccino" or "Latte Mac-
chiato" button.
» The beverage is prepared.
» The display shows: Easy Cleaning?
(OK for start).
3. Remove the vessel.
4. Run the Easy Cleaning programme or
prepare another beverage and then
carry it out, see section9.4, page57.
5.3 Preparing milk froth and
warm milk
The preparation of milk froth and warm
milk is similar.
Requirement: Milk is connected.
1. Place a vessel beneath the outlet.
2. Press the "Milk froth/milk" button.
a) Milk froth = briey press button
b) Warm milk = press the button for
longer (2 seconds)
» Milk dispensing begins.

Melitta Caffeo Barista T Smart Specifications

General

Brand	Melitta
Model	Caffeo Barista T Smart
Category	Coffee Maker
Language	English