Melitta Caffeo Lattea F300-100 - Restoring Default Settings

ENGLISH
63
Display Brewing temperature
low
medium
(factory setting)
high
• Press the ON/OFF button to conrm the selected brewing
temperature.
→ All symbols in the display ash briey as conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
10.5 Resetting the appliance to the default settings
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 52).
• Simultaneously press the button for coffee strength and the ON/
OFF button for more than 2 seconds.
→ All settings are now reset to the factory settings. The standby symbol
will ash briey as conrmation.
Overview of factory settings:
Function settings Factory settings
Water hardness Water hardness 4
Energy-saving mode
5 minutes
Auto-OFF function
30 minutes
Brewing temperature
Medium
Heft_Lattea_EU_2_3.indd 63 09.04.2014 14:04:22