72
15 Thoroughly rinse the water tank, ll it to the max. mark with fresh tap
water.
16 Press the button for coffee strength to continue with the integrated
descaling programme.
→ Water ows in multiple intervals out of the milk shower into the coffee
grounds container. The symbol for the milk shower ashes during this
process. Subsequently, the symbol for the milk shower illuminates.
→ Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols are shown on the display.
17 Turn the rotary switch for the milk shower anti-clockwise to close the
milk shower.
→ Water ows inside the appliance into the drip tray. Subsequently, the symbol
for the drip tray illuminates.
18 Empty the drip tray and then reinsert it.
→ The standby symbol is illuminated after a brief heat-up phase.
The appliance is ready for operation.
19 Reinsert the Melitta
®
Claris
®
water lter into the water tank.
Heft_Lattea_EU_2_3.indd 72 09.04.2014 14:04:23
To Next Page
Loading...
Need help?
General
