➀
+ /–
CC
SET
JW
11. Settings
The following functions allow you to change the
settings for the dispensing modes and the individual
products, provided these have been enabled by our
Technical Service staff.
Calling up the function setting
➀ Open the front access door and turn the
key-operated switch to the "Manager" position.
❍ All settings can be called up consecutively.
Press the
SET button to call them up in the
following order:
11.a Coffee outlet for jugs
11.b Storage volume
11.c Dosed / undosed dispensing
11.d Display info
11.e External registration on / off
11.f Prices
11.g Dosage volumes
11.h Ground coffee dosage
11.i Extraction time
11.j Timer
11.k FAST program
11.l Cleaning time
11.m Current time
11.n Current date
❍ Note: Only the "Storage volume" function is
also accessible in operator mode. This enables
the operator to adjust the storage volume as
required. To do this, simply press the
SET
button.
➀ To exit the function settings, turn the
key-operated switch back to the "Operator"
position.
Changing the settings
All changeable options are shown on the display. The
chosen option is displayed in capital letters between
angle brackets.
❍ Press the +
/–buttons to switch between
the displayed options.
If there are selectable digits, you can
❍ use the
CC button to move left and
❍ use the
JW button to move right
CC = "Cup of coffee" button
JC = "Jug of coffee" button
JW = "Jug of water" button
Manager
Operator
GB
12
a_F_ c2000_en.dtp
To Next Page
Loading...
