Extraction time
Push ==> CC
Extraction time
for 1,0 l : 000
s
Extraction time
for 2,0 l : 000
s
➁
To change the gram setting,
❍ choose the position that you would like to
change. This is indicated by an underscore
(cursor). Navigate with the ...
❍ CC button to the right and
❍ the
JW button to the left.
❍ Press the
+ /–buttons to increase or
decrease the highlighted value.
❍ By pressing the
SET button, the chosen value is
stored and the next function displayed. If you
wish to set further ground coffee dosages, press
the
SET button until the desired function setting
is displayed.
11.i Extraction time
This function allows you to set an extraction time of
up to 250 seconds for the storage volumes 1 and 2 l
to improve utilization of the coffee.
➀ If the display shows "Extraction time", press the
CC button. Choose the storage volume by
navigating ...
❍ forwards by pressing the
SET button or
❍ backwards by pressing the
SET and –
buttons. The following storage volumes are
available:
– for 1.0 l
– for 2.0 l
Once you have chosen the desired storage volume,
the brewing time (in seconds) is displayed next to it.
By increasing this value, the total dispensing time is
increased and the cup performance decreased.
To change the extraction time,
❍ first choose the position that you would like to
change. This is indicated by an underscore
(cursor). Navigate with the ...
❍ CC button to the right and
❍ the
JW button to the left.
❍ Press the
+ /–buttons to increase or
decrease the highlighted value.
❍ By pressing the
SET button, the chosen value
is stored and the next function displayed. If
you wish to set further extraction times, press
the
SET button, until the desired function setting
is displayed.
+ /–
CC
JW
SET JC
GB
16
a_F_ c2000_en.dtp
To Next Page
Loading...
