Jug
Yes >No<
S : 1,5 Ltr.
Minimum supplies level : 2 l
Dispensing
undosed >dosed<
➀
➁
➂
11.a Coffee jug filling
This setting allows you to activate or disable coffee
jug filling.
➀ If the display shows "Jug", you can press the
+
/ – buttons to switch between the
following options. Select
"Yes" to activate coffee jug filling
"No" to disable coffee jug filling.
11.b Storage volume
This function allows you to set a storage volume. If
the level falls below this quantity, it is automatically
topped up. The brew volume is set by our Technical
Service staff.
➁ If the display shows "Minimum supplies level",
you can press the
+ / – buttons to increase
or decrease the set value. If you set a minimum
supplies level ...
– between 1-4l,the beverage is automatically
topped up if it falls below this level
– below 1 l (e.g. 0.5 l), the beverage is not
topped up.
The latter setting is useful to empty the machine
at the end of the day or if only a small amount of
coffee is needed.
11.c Dosed / undosed dispensing
This setting allows you to set the product button
functions.
➂ If the display shows "Dispensing", you can
press the
+ /–buttons to switch between
the following options. Choose
– "undosed", if a product is to be dispensed
for as long as the relevant product button is
pressed
– "dosed", if a fixed dispensing amount is to
be dispensed when the product button is
pressed and released. See chapter 11.g for
instructions on how to change this function.
Note: If the external registration function (chapter
11.e) is activated, the above function can only be
adjusted in the key-operated switch position
"Manager".
You can now choose between
– Storage volume 0 l
– Single brew 0.5 l (no top-up)
– Storage volume 1,0 l
– Storage volume 2,0 l
– Storage volume 3,0 l
– Storage volume 4,0 l
Manager
Operator
GB
13
a_F_ c2000_en.dtp
To Next Page
Loading...
