ConnectX®-2 VPI Single and Dual Port QSFP InfiniBand and Ethernet Adapter Card User Manual Rev 1.6
Mellanox Technologies
33
To check the IB link status, for IB and VPI cards, run “ibstat” and focus on the Physical state
attributes.
Example:
Host# ibstat
CA 'mlx4_0'
CA type: MT26428
Number of ports: 2
Firmware version: 2.9.1000
Hardware version: b0
Node GUID: 0x0002c903000e9c5e
System image GUID: 0x0002c903000e9c61
Port 1:
State: Active
Physical state: LinkUp
Rate: 40
Base lid: 2
LMC: 0
SM lid: 1
Capability mask: 0x02510868
Port GUID: 0x0002c903000e9c5f
Link layer: IB
Port 2:
State: Down
Physical state: Polling
Rate: 70
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x02510868
Port GUID: 0x0002c903000e9c60
Link layer: IB
Check the OFED version
To Next Page
Loading...
Need help?
General
