ConnectX®-2 VPI Single and Dual Port QSFP InfiniBand and Ethernet Adapter Card User Manual Rev 1.6
Mellanox Technologies
43
3. If a newer firmware version exists for your adapter card, update the firmware
a. Download the firmware image zip file from the Download Center (see Step 2a above)
b. Unzip the firmware image
c. Burn the firmware image. Enter:
> flint -d <device_name> -i <binary image> burn
d. Reboot the computer
e. Enter: mst start
f. Verify that the card firmware was updated successfully
> flint -d /dev/mst/mt23108_pci_cr0 query
...
To Next Page
Loading...
Need help?
General
