Memotec Inc.
List of Figures
Front View of the SDM-9120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Front View of the SDM-9220/9230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Removing the Cover from the SDM-9220/9230 chassis . . . . . . . . . . . . . . . . . . . . 3-4
Removing the Cover from the SDM-9120 chassis . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Location of Optional Hardware on the Main Board . . . . . . . . . . . . . . . . . . . . . . . 3-5
Replacing the Cover onto the SDM-9220/9230 chassis . . . . . . . . . . . . . . . . . . . . 3-8
JP5 AND JP6 locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12
Position of Jumper Connectors J4 and J7 on the Dual Port T1/E1 Interface Card . .3-14
Location of Interface Cards in the SDM-9120/9220/9230 Slots . . . . . . . . . . . . . .3-18
SDM-9120 Rackmount Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20
Rackmount Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Completed Rackmount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Four-wire E&M Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24
Two-wire E&M Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24
Installing a ferrite with an RJ-45/RJ-48 connector . . . . . . . . . . . . . . . . . . . . . . .3-27
Power Cords for SDM-9220 UAC or SDM-9230 UAC Unit . . . . . . . . . . . . . . . . . . .3-28
Rear View of the SDM-9120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Rear View of the SDM-9230 UAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
SDM-9220/9230 Installed with rackmount brackets . . . . . . . . . . . . . . . . . . . . . .4-11
SDM-9120 with rackmount brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
Mounting screws and mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12
Side view of a unit with bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12
DSP-160 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-13
High-density DSP module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-14
Low profile and regular interface cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-15
SDM-9120 interface card faceplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16
The Dual FXS interface card (top), and Quad FXS interface card (bottom) . . . . . .4-18
Dual FXO interface card (top), Quad FXO interface card (bottom) . . . . . . . . . . . .4-19
The E&M interface card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
To Next Page
Loading...
Need help?
General
