15
3 Operations
3.1 Prepare for Running
The MEND Professional
TM
device can be used inside or outside the soft back
carrying case. There are two Velcro strips attached inside the soft back carrying case.
Install Batteries
The MEND Professional
TM
device
uses two alkaline batteries in size
“AA”. Remove the batteries when the
device is not going to be used for more
than one month.
Connect Wires to the MEND Professional
TM
device
Insert the plugs into the jacks on the rear panel of the MEND Professional
TM
device. Match the color of the plug with the color on the rear panel.
Use the Combined Ports for standard microcurrent
(ie. gloves, towels and sticky pads)
Use the Separated Ports for Probes
To Next Page
Loading...