Protocol details: Press the RIGHT arrow key to see the details of the
protocol. Use the UP/DOWN keys to scroll the screen to view the full details
of the protocol.
Run a Therapy Protocol
Press the START key to run a protocol. The protocol will start and
microcurrent will flow from the output jacks. The protocol will stop after
the programmed run time. The CH1/CH2 LEDs will flash to indicate poor
connection from the device to the body.
Pause the Therapy Protocol
While a protocol is running, press the PAUSE key if you need to
temporarily pause a protocol. Press START to resume treatment.
Protocol details include:
• Name
• Description
• Time
• # of frequency pairs
• Frequency combinations
• Microamperage
If you do not start another
protocol, the unit will
automatically turn off.
The maximum time for a
PAUSE is 30 minutes.
To Next Page
Loading...