EasyManua.ls Logo

MEND Technology IS02PROs - 5 Technical Manual; 5.1 Technical Specifications

MEND Technology IS02PROs
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
5 Technical Manual
5.1 Technical Specifications
Carrier Frequency
Frequency Range: 0.1 Hz to 999.9 Hz programmable
Frequency Accuracy: 0.1 Hz to 99.9 Hz: +/-0.1%
100.0 Hz to 499.9 Hz: +/-0.3%
500.0 Hz to 999.9 Hz: +/-.5%
Frequency Waveform: Square pulses
Frequency Duty Cycle: 0.1 Hz to 99.9 Hz 49% ~ 51%
100 Hz to 499.9 Hz 45% ~ 55%
500 Hz to 999.9 Hz 40% ~ 60%
Modulation Envelope
Period: Programmable from 4 ms to 60000 ms
Modulation Waveform Programmable ramp up/down slopes
Programmable duty cycles
Current Intensity: 20 μA to 400 μA programmable,
In 10μA increment
Current Accuracy: 20 μA ~ 200 μA : +/- 5 μA
200 μA ~ 400 μA : +/- 10 μA
Outputs
Output Polarity: Programmable alternating, always +, or always
Output Load Resistance: 0 to 100K ohm
Output Indication: LED for poor connection
Output Channels: Two
Output Channel Dependency: Fully independent, or correlative with
programmable phase between two channels for the modulation
envelopes. Either one can be turned off by programming.

Table of Contents