30
Sanitizing
Clean and disinfect the IS02 main device, the leadwires and reusable accessories
and electrodes at least once a week or between uses.
To sanitize the IS02 main device, wipe the device with non-dripping cotton balls
or sanitizing wipes with germicide or alcohol. It would be safe to wipe the
faceplate (keypad), display (LCD screen) and the whole enclosure if the wipe does
not drip. Wipe off extra liquid on unit surface immediately.
The IS02 main device is not waterproof. Excessive liquid could leak into
the device especially through the edge of the LCD screen to cause the device to
malfunction.
To sanitize lead wires, wipe the leads with cotton balls or sanitizing wipes with
germicide or alcohol.
To sanitize the electrodes or gloves: Electrodes and gloves are single patient use
and not to be shared between people.
Life of Service
All IS02 devices have been tested and calibrated at manufacturing. The device
does not need re-calibration for general use in 10 years. The IS02 device can be
re-calibrated within or after 10 years of manufacturing for assurance of the
accuracy or to comply with certain requirements from user’s application. Our
manufacturer provides such calibration service with a fee.
Disposal
Do not throw the device into trash bin for regular waste. Follow local
law or regulation for the collection, recycling and recovery of electronic
waste.
To Next Page
Loading...