Mendota FV44i - UNPACKING THE INSERT

85-03-01060-M FV44i Décor Gen 3 Page 49
4.2 UNPACKING THE INSERT
The Insert arrives from the factory on a wooden pallet with a cardboard box encasing the pallet and Insert. To remove the outer
box, identify and remove four Philips head drywall screws that secure a cardboard L pincher at the bottom of each corner of the
box.
Lift the outer box vertically straight upward until lower edge of the box clears the top of the unit body. Set the box aside.
Mendota recommends recycling the outer box.
Outer Box Removal