STORAGE AND RECOMMISSIONING
SECTION 6
Page 95CMD-4081877 / 90-865861040 MARCH 2004
9. Perform all checks on Operation Chart in the Starting Procedure column found in
Section 3 of the Operation, Maintenance and Warranty Manual provided with the
product.
CAUTION
Overheating from insufficient cooling water will cause engine and drive system
damage. Ensure that there is sufficient water always available at water inlet holes
during operation.
10. Supply cooling water to the water inlet openings.
11. Start the engine and closely observe instrumentation. Ensure that all systems are
functioning correctly.
12. Carefully inspect the engine for fuel, oil, fluid, water and exhaust leaks.
13. Check the steering system, shift, and throttle control for proper operation.
To Next Page
Loading...
