MAINTENANCE
SECTION 5
Page 63CMD-4081877 / 90-865861040 MARCH 2004
CE496
Changing
1. Clean the exterior of the transmission around the fluid filter assembly.
2. Use a 6 mm allen wrench and remove the fluid filter assembly by turning the assembly
nut counterclockwise and pulling at the same time.
a
b
79799
a-Fluid filter assembly
b-Assembly nut
3. Push the hose of a suction pump through suction pipe and down to the bottom of the
housing.
4. Pump the fluid from the housing into a suitable container. Dispose of fluid properly.
71043
a
b
a-Suction pipe
b-Suction pump
To Next Page
Loading...
