MAINTENANCE
SECTION 5
Page 67CMD-4081877 / 90-865861040 MARCH 2004
00000 was 0072 / and CD166
Filling
1. If coolant is low in the coolant expansion tank, add specified coolant as necessary to
bring the level to within 25 mm (1 in.) of the bottom of the filler neck or between the upper
and lower marks, if marked.
Description
Where Used Part Number
Marine Engine Coolant 92-813054A2
Fleetguard Compleat with DCA4
Closed cooling system
Obtain Locally
Fleetguard
Part Number:
CC2825
IMPORTANT: When installing the pressure cap, be sure to tighten it securely to
prevent coolant loss.
2. Install the pressure cap. Tighten securely.
3. With the engine at normal operating temperature, maintain the coolant level in the
coolant expansion tank within 25 mm (1 in.) of the bottom of the filler neck or between
the upper and lower marks, if marked.
79918
a
b
a-Pressure cap
b-Bottom of filler neck
00000 was 0073 made CMD
Changing
Contact your authorized Cummins MerCruiser Diesel dealer / distributor.
0076
To Next Page
Loading...
Need help?
General