EasyManua.ls Logo

Mercury 2.8 EI 200 - Maintenance Schedules

Mercury 2.8 EI 200
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
SECTION 5
Page 53CMD-4081877 / 90-865861040 MARCH 2004
00000 was CD937 with deletions, and with added from CE511
Maintenance Schedules
Routine Maintenance *
Each
Day
Start
Each
Day
End
Weekly
Every
Two
Months
Check the engine oil level (interval can be
extended based on experience).
D
Check the coolant level. D
If operating in salt, brackish or polluted
waters, flush the cooling system after each
use.
D
Drain any water from the fuel filter after each
use (If operating in freezing temperatures).
D
Check the transmission fluid level
D
Check the water inlets for debris or marine
growth. Check the seawater strainer and
clean.
D
Check the battery connections and fluid
level.
D
Operating in Saltwater Only: treat the engine
surface with corrosion guard.
D
Clean the air filter.
1
D
Ensure that the gauges and the wiring
connections are secure. Clean the gauges.
2
D
* Only perform maintenance which applies to your particular power package.
1
Or every 50 hours whichever occurs first.
2
Or every 50 hours, whichever occurs first. If operating in saltwater, interval is reduced to every
25 hours or 30 days whichever occurs first.
3 If operating in only freshwater, this maintenance may be extended to every four months.

Table of Contents

Related product manuals