MAINTENANCE
107
b. If using copper or tin based anti‑fouling paints, avoid any
electrical interconnection between the Mercury Marine
Product, anodic blocks, and the paint by allowing a
minimum of 40 mm (1.5 in.) unpainted area on the transom
of the boat around these items.
a - Anti‑fouling paint
b - Unpainted area
IMPORTANT: Corrosion damage that results from the improper
application of anti‑fouling paint will not be covered by the limited
warranty.
NOTE: Do not paint anodes. Painting anodes will render them
ineffective as galvanic corrosion inhibitors.
2.
Painting Drive Unit or Transom Assembly
To Next Page
Loading...
