Mercury HP700 SCi - Starting, Shifting and Stopping

OPERATION
46
NOTE: The word trim is usually considered the first 20° up/out
movement from vertical position.
1
2
7868
a - Trailering and trimming up/out position - Press (top) up/
out portion of switch until drive unit reaches desired trim/
trailering position.
b - Trim drive unit in/down position - Press (bottom) in/down
portion of switch until drive unit reaches desired trim
position.
Starting, Shifting and Stopping
!
WARNING
Explosive fumes contained in the engine compartment can cause
serious injury or death from fire or explosion. Before starting the
engine, operate the bilge blower or vent the engine compartment
for at least five minutes.
NEW ENGINES OR ENGINES COMING OUT OF STORAGE
See Power Package Recommissioning.