Mercury HP700 SCi - Sterndrive Cleaver Propeller Installation (NXT¹)

MAINTENANCE
89
• Throttle linkage and cable ‑ Lubricate cable and swivels.
a
a
10305
79
79
a - Lubrication points
Tube Ref No. Description Where Used Part No.
79
MerCruiser 4-cycle
25W40 Engine Oil
Pivot points 92-858048K01
Sterndrive Cleaver Propeller Installation (NXT¹)
IMPORTANT: Ensure that the propeller direction of rotation
matches the propeller shaft direction of rotation.
!
WARNING
Rotating propellers can cause serious injury or death. Never
operate the boat out of the water with a propeller installed. Before
installing or removing a propeller, place the drive unit in neutral
and engage the lanyard stop switch to prevent the engine from
starting. Place a block of wood between the propeller blade and
the anti‑ventilation plate.