GENERAL INFORMATION
14
High‑Speed and High‑Performance Boat Operation
If your power package is to be used on a high speed or high
performance boat with which you are unfamiliar, we recommend
that you never operate it at its high speed capability without first
requesting an initial orientation and familiarization demonstration
ride with your dealer or an operator experienced with your boat/
power package combination. For additional information, obtain a
copy of our Hi‑Performance Boat Operation booklet from your
dealer, distributor, or Mercury Marine.
Lanyard Stop Switch
The purpose of a lanyard stop switch is to turn off the engine when
the operator moves far enough away from the operator's position
(as in accidental ejection from the operator's position) to activate
the switch. A lanyard stop switch can be installed as an accessory
‑ generally on the dashboard or side adjacent to the operator's
position.
While activation of the lanyard stop switch will stop the engine
immediately, a boat will continue to coast for some distance
depending upon the velocity and degree of any turn at shut
down. However, the boat will not complete a full circle. While the
boat is coasting, it can cause injury to anyone in the boat's path as
seriously as the boat would when under power.
a - Lanyard cord
b - Lanyard stop switch
We strongly recommend that other occupants be instructed on
proper starting and operating procedures should they be required
to operate the engine in an emergency (e.g. if the operator is
accidentally ejected).
To Next Page
Loading...
Need help?
General
