8. Push on the end of the spark plug boot to ensure the boot is completely
engaged and seated onto the spark plug.
Push the spark plug boot
9. Install the top cowl.
Fuses
!
CAUTION
Always use the appropriate size wire and fuse to protect the wiring or
components from starting a fire due to high current draw.
IMPORTANT:An ATC fuse has the fuse element enclosed or sealed inside
the plastic housing. This type of fuse must be used for marine applications.
Marine applications are exposed to environments that may have the potential to
accumulate explosive vapors. ATO fuses have exposed elements and should
never be used in marine applications.
ENGINE-MOUNTED FUSE PANEL
The electrical wiring circuits on the outboard are protected from overload with
fuses. If a fuse is open, try to locate and correct the cause of the overload. If
the cause is not found, the fuse may open again.
1. Locate the fuse holder on the starboard side of the engine and remove
the cover from the fuse holder.
MAINTENANCE
eng 107
To Next Page
Loading...
