Dual-handle console ERC
a - Access cover
b - Detent adjustment screws
c - Handle friction adjustment screws
ZERO EFFORT CONTROLS
Zero Effort controls allow the operator to control the shifting and throttle with
separate control handles. Zero Effort controls are available in single, and
multiple engine applications including shadow mode operation.
Hot Foot
REQUIREMENTS FOR OPERATION OF A HOT FOOT
Engine speed is controlled from idle to WOT by either the foot throttle or the
panel mount control handle. Hot foot throttle operation requires the DTS system
be set up with a switch that can turn the hot foot throttle control off or on. This
will allow the boat operator to select the throttle operation through the electronic
remote control assembly or through the hot foot control assembly.
FEATURES AND CONTROLS
eng 45
To Next Page
Loading...
