Mercury Racing 500R - Page 121

CHECKING TRIM WEAR PAD CLEARANCE
a - Trim manifold
b - Trim wear pads
c - Clearance (refer to the following table)
IMPORTANT:The trim thrust guide wear pads must be shimmed for a
maximum clearance of 0.5 mm (0.02 in.) per side.
Trim thrust guide wear pad to lower cradle clearance (per side)
Minimum clearance 0.05 mm (0.002 in.)
Maximum clearance 0.5 mm (0.02 in.)
68457
a
b
cc
b
MAINTENANCE
eng 111 