• When shifting, always stop at the neutral position and allow the engine
speed to return to idle.
• Panel mount remote control requires the operator to always press shift
lock while moving the control handle out of the neutral position.
3428
• Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT:Never shift the outboard into gear unless the engine speed is at
idle.
• The outboard has three gear shift positions to provide operation: forward,
neutral, and reverse.
a - Forward
b - Neutral
c - Reverse
• When shifting, always stop at the neutral position and allow the engine
speed to return to idle.
OPERATION
80 eng
To Next Page
Loading...
