SYSTEM
90-892133 JULY 2003 Page 7-9
System Calibration
User Keyless Code
CHANGING YOUR KEYLESS CODE NUMBER
1. Power up the System View using the HOME button.
2. Open the System View directories to access the USER KEYLESS CODE menu.
3. Enter your existing 4 digit key code number in the first menu box as follows:
a. Press to move the highlight box to each digit.
b. Press to select each digit.
c. After entering the 4 digit number, press SELECT to continue.
4. Select a new 4 digit key code number and enter that number in the second menu box.
Press SELECT key. This confirms the new key code number.
1
3
2
4
To Next Page
Loading...