Need help?Do you have a question about the Mercury SmartCraft SC5000 and is the answer not in the manual?
Details the operation of the System View's input controls, including trackpad and buttons.
Explains the initial power-on sequence and the sequence of startup screens displayed.
Introduces the various screen types and their organization within the system interface.
Describes the layout, options, and data presented on the main System View home screen.
Explains the different screens that show specific operational and environmental data.
Covers how the system alerts users to problems and displays alarm information.
Overview of the propulsion system data and features available on the System View.
Details how engine speed (RPM) and boat speed are monitored and shown.
Explains the displays for critical engine parameters like temperature, pressure, and fuel flow.
Shows how the propulsion unit's trim and trailer positions are visually represented.
Guides users on setting and utilizing the engine trolling speed control feature.
Introduces the system's capabilities for monitoring vessel status and conditions.
Details how the vessel's steering angle is indicated on the display.
Explains the display of fuel, oil, water, and waste tank fullness.
Covers display of essential vessel information like run time and fuel levels.
An overview of the system's navigation assistance and fuel tracking features.
Details the course and waypoint guidance displays for navigation.
Explains how to review past trip data including fuel economy and speed.
Covers displays for water depth and associated plot lines.
Describes how the system calculates and displays the estimated travel range.
Introduces system capabilities for customizing display and operational parameters.
Guides users on adjusting display appearance and time settings.
Explains configuration of measurement units, language, and sensor calibration.
Details how to set up, calibrate, and manage system sensors.
Overview of system functions including maintenance, alarms, and calibration.
Outlines steps for calibrating various system components and functions.
Details how to record engine run time for service interval tracking.
Explains how to view, interpret, and troubleshoot active system alarms.
Introduces the installation process, components, and safety precautions.
Step-by-step instructions for physically installing the System View display unit.
Details the electrical connections for the System View and accessories.
Guidance on connecting and configuring an optional GPS unit with the system.
Alphabetical listing of topics with page references for quick lookup.
Alphabetical listing of system features with page references for easy access.
Index entries for alarm messages, troubleshooting, and related system issues.
To Next Page
General