SYSTEM
Page 7-10 90-892133 JULY 2003
Maintenance Log
Maintenance Log
RECORDING RUN TIME
The maintenance log allows you to record the current engine run time at each service inter-
val. Service intervals should be performed at the time periods specified in your
Engine Op-
eration, Maintenance Manual.
Recording engine run time at maintenance intervals:
1. Open the MAINTENANCE LOG directory.
2. Use the trackpad to select the desired RUN-TIME interval box. The engine run time in
the box you selected will be blinking. If this is the desired interval you want to record cur-
rent engine run time, press SELECT to save. If you are trying to overwrite a previously
recorded interval, you will be asked to confirm your intent.
1
2
To Next Page
Loading...