Mercusys MW302R - 4.9.6. System Log; 4.9.7. Diagnostics

55
Chapter 4
3. Click SAVE TO LOCAL to save the system logs to a local disk.
4. 9. 7. Diagnostics
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Diagnostics.
3. Enter the information:
1 ) Choose Ping or Tracert as the diagnostic tool to test the connectivity.
• Ping is used to test the connectivity between the router and the tested host, and
measure the round-trip time.