EasyManuals Logo

Mercusys MW302R User Manual

Mercusys MW302R
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
21
Chapter 4
VPN Server IP/ Domain Name - Enter the VPN server’s IP address or domain name
provided by your ISP.
MTU Size - The default MTU size is “1420” bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
Connection Mode
Auto - In this mode, the internet connection reconnects automatically any it gets
disconnected.
On Demand - In this mode, the internet connection will be terminated automatically
after a specified inactivity period (Max Idle Time) and be re-established when you
attempt to access the internet again.
Manual - In this mode, the internet connection is controlled manually by clicking the
Connect/Disconnect button. This mode also supports the Max Idle Time function
as On Demand mode. Enter a maximum time (in minutes), the internet connection
can be inactive before it is terminated into the Max Idle Time. The default value is
15 minutes. If you want the internet connection remains active all the time, enter 0
(zero).
Note:
Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some applications
are visiting the internet continually in the background.
4. 2. 3. MAC Clone
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Network > Internet and locate the MAC Clone section.
3. Configure Router MAC Address and click SAVE.
Use Default MAC Address - Do not change the default MAC address of your router
in case the ISP does not bind the assigned IP address to the MAC address.
Use Current MAC Address - Select to copy the current MAC address of the
computer that is connected to the router, in case the ISP binds the assigned IP
address to the MAC address.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys MW302R and is the answer not in the manual?

Mercusys MW302R Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Product typeTabletop router
Product colorWhite
Networking standards-
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Transmit power20 dBmW
Antenna gain level (max)5 dBi
Ethernet LAN (RJ-45) ports3
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Output current0.6 A
Output voltage5 V
Power source typeDC
Security algorithmsWPA-PSK, WPA2-PSK
Cables includedLAN (RJ-45)
Package typeBox
Number of products included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth94 mm
Width114 mm
Height26 mm

Related product manuals