How to reset my Mercusys MW300D Network Router to factory default settings?
To restore your modem router to its factory default settings, you can either: 1. Press and hold the WPS/RESET button for about 8 seconds until all LEDs turn off momentarily, then release the button. 2. Restore the default setting from Maintenance ? SysRestart of the modem router's web management page.
What to do if I forgot my Mercusys Network Router password?
If you've forgotten your password, reset the modem router. After the reset, use 'admin' (all lowercase) for both the username and password. By default, the wireless network has no password. If you previously set a password for the wireless network, log in to the modem router's web management page and go to Interface Setup ? Wireless to retrieve or reset your password.
What to do if my Mercusys MW300D won't let me access the internet?
First, check that all connectors, including the telephone line, Ethernet cables, and power adapter, are securely connected. If you can access the web management page, verify your VPI/VCI, Connection Type, account username, and password with your ISP. As a last resort, restore your modem router to its factory default settings and reconfigure it.
What to do if I can't access the web management page of my Mercusys Network Router?
Ensure the modem router is correctly connected to the computer and the LED indicators are lit. Verify that your computer's IP address and DNS server address are set to obtain automatically. Double-check that you're using the correct default access credentials. You may also want to try a different web browser or computer. As a final step, reset the modem router to factory default settings.
Information on CE marking, EU conformity, and RF exposure guidelines for the device.
Key regulatory information including NCC and BSMI notices for product compliance.
Defines the meaning of various symbols found on the product label for user understanding.
Combines wired/wireless connection with integrated DSL modem for ease of use and space saving.
Details the physical design and components of the modem router.
Guidance on selecting an optimal location for the modem router for best performance and security.
Instructions for physically connecting the modem router to the ADSL line and computer.
View device status, system logs, and network traffic statistics.
Configure Internet, LAN, Wireless, 6RD, and Guest Network settings.
Configure Firewall, Routing, NAT, QoS, VLAN, and ADSL for detailed network control.
Manage ACL, Filter, SNMP, UPnP, DDNS, and CWMP for network security.
Perform Administration, Time Zone, Firmware updates, restarts, and diagnostics.
Step-by-step guide to setting up the TCP/IP protocol on your computer for network access.
How to test the connection between your PC and the modem router using the Ping command.
Guidance on recovering or resetting web management and wireless passwords.
Methods to restore the modem router to its factory default configuration.
Troubleshooting steps for issues accessing the modem router's web management interface.
Steps to resolve problems when the modem router cannot establish an Internet connection.
General| Product type | Tabletop router |
|---|---|
| Product color | White |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| DSL WAN | Yes |
| 3G/4G USB modem compatibility | No |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Ethernet |
| Ethernet LAN (RJ-45) ports | 3 |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Transmit power | 20 dBmW |
| Cables included | LAN (RJ-45) |
| Power source type | AC |
To Next Page
