300Mbps Wireless N ADSL2+ Modem Router
- 54 -
Note:
1) There is only one account that can access web management page. The default account is
admin, and the password is admin. Admin has read/write access privilege.
2) When you change the password, you should enter the new password twice, and then click
SAVE to make the new password take effect.
4.5.2 Time Zone
Go to Maintenance → Time Zone, and you can configure the system time in the screen.
The system time is the time used by the device for scheduling services. There are three
methods to configure the time. You can manually set the time or connect to a NTP (Network
Time Protocol) server. If a NTP server is set, you will only need to set the time zone. If you
manually set the time, you may also set Daylight Saving dates and the system time will
automatically adjust on those dates.
1) NTP Server automatically
Select NTP Server automatically as the Synchronize time, then you only need to set the time
zone.
Note:
The ADSL modem router has some built-in NTP Servers. When the modem router connects to
the Internet, the modem router will get the system time automatically from the NTP Server. You
can also configure the NTP Server address manually, and then the modem router will get the
time from the specific Server firstly.
To Next Page
Loading...
