Name: Mercusys MW300D
Brand: Mercusys
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MW300D

300Mbps Wireless N ADSL2+ Modem Router

- 34 -

• 6RD Enable: The default setting is disabled. Select Enable when your WAN connection is

IPv4 while LAN connection is IPv6.

• 6rd IPv6 Prefix: Enter the prefix of the IPv6.

• IPv4 Mask Length: The length of the selected WAN connection’s IPv4 mask.

• 6RD Border Relay IPv4Addr: The IPv4 address of the border relay router of 6RD tunnel.

• Use PVC: Select the PVC from the drop-down list.

Note:

To enable the function, there should not be any IPv6 WAN connections.

4.2.5 Guest Network

Go to Interface Setup → Guest Network, and you will see the Guest Network screen. This

feature allows you to create a separate network for your guests without allowing them to

access your main network and the computers connected to it.

You can enable or disable Guest Network. The default setting is disabled. When you enable this

function, you could set wireless parameters for Guest Network.

Questions and Answers:

Need help?

Do you have a question about the Mercusys MW300D and is the answer not in the manual?

Mercusys MW300D Specifications

General